Power Bank A-10000

-

Power Bank A-10000

Power Bank Specification

1) Polymer battery

2) Input: Micro USB 5-12V/3A-1.5A/18W

Type C 5-12V/3A-1.5A/18W

3) Output: Type C 5-12V/3A-1.5A/18W

2*USB A: 5-12V/3A-1.5A/18W

Total: 5V 3A(share)

4) Compatibility: Type-C/PD/QC3.0/FCP/SCP/AFC/PE

5) Color: black, white or customzied

6) Size: 135.95*67.95*15mm

7) Plastic cases

power bank factory Description

A series Power bank

Large Capacity

A series with three capacity 10000mAh, 15000mAh and 20000mAh that contains enough battery to charge multiple devices.

Supports 18W PD 3.0 and QC 3.0 Fast Charge

Incorporating both PD 3.0 and Qualcomm® Quick Charge™ 3.0 technology that can fast charge your devices. also 60W PD is available

Charge Multiple Devices

Charge three devices simultaneously by plugging one into the USB-C port and another two into the USB-A ports.

评论

发表评论

此博客中的热门博文

How to Charge a Deep Cycle Battery in a Car?

-
图片
Deep cycle batteries   are designed to provide a continuous flow of power over an extended period. Unlike starting batteries that deliver a quick burst of energy to start an engine, deep cycle batteries are built to withstand deep discharges and subsequent recharges. They are commonly used in car, marine, golf cart, and renewable energy applications. Steps to Charge a Deep Cycle Battery in a Car Step 1: Safety precautions Before attempting to charge a deep cycle battery, it's essential to take safety precautions. Make sure you are in a well-ventilated area, wear protective gloves and safety goggles, and keep any open flames or sparks away from the battery. Step 2: Assess the battery condition Before charging, inspect the battery for any signs of damage or leaks. Ensure the battery terminals are clean and free from corrosion. If you notice any issues, it's advisable to address them before proceeding with the charging process. Step 3: Determine the battery's state of charge T...
阅读全文

Lithium batteries replacing sealed lead acid in float applications

-
图片
  It is extremely typical for lithium batteries to be positioned in an application where a shantytown battery used to be maintained on a floating fee. There has been some problem, whether this is secure for lithium batteries. It is usually appropriate to make use of a basic continuous voltage SLA charger with our lithium batteries, as long as it abides by particular requirements. As a side note, some clever or multi-stage shanty town battery chargers have an attribute that detects an open-circuit voltage (OCV). An over-discharged lithium battery that is in defense mode will have an OCV of 0. This type of charger would presume this battery is dead as well as would not attempt to charge it. A battery charger with a lithium setup will attempt to recuperate or "awaken" an over-discharged lithium battery. Long term storage space If you need to maintain your batteries in storage for a prolonged duration, there are a few things to think about as the storage space needs are various f...
阅读全文

How Does Car Start/Stop Technology Work?

-
图片
Starting a car eats up more fuel than letting it idle for an hour. While cold starts tend to suck down a fair amount of gas when you first turn the ignition key, it’s the exact opposite when the engine is at optimal running temperature. This is why so many new car manufacturers are incorporating start/stop technology into their automobiles. The Society of Automotive Engineers ran a study that found that modern stop/start systems actually help increase fuel economy by over eight percent when running in heavy traffic. Over time, this can add up to a tremendous amount of fuel—and money—savings. Read on to learn more about how to stop/start technology works and one critical component of that system that uses more power than you may realize.   Start/Stop Technology While each car manufacturer has its own proprietary system, they all work very similarly. When you apply the brakes, and your car comes to a complete stop, the ECU cuts both fuel and spark, thereby instantly shuttin...
阅读全文